I’ve entered the correct password, but I still can’t connect

Double-check that you have the correct password

Passwords are case-sensitive (it matters whether they have capital or lower-case letters), so check that you didn’t get the case of one of the letters wrong.

Thử khoá mật thập lục phân hoặc ASCII

The password you enter can also be represented in a different way — as a string of characters in hexadecimal (numbers 0-9 and letters a-f) called a pass key. Each password has an equivalent pass key. If you have access to the pass key as well as the password/passphrase, try typing the pass key instead. Make sure you select the correct wireless security option when asked for your password (for example, select WEP 40/128-bit Key if you’re typing the 40-character pass key for a WEP-encrypted connection).

Thử tắt cạc không dây và mở lại

Sometimes wireless cards get stuck or experience a minor problem that means they won’t connect. Try turning the card off and then on again to reset it — see Chẩn đoán mạng không dây for more information.

Check that you’re using the correct type of wireless security

When prompted for your wireless security password, you can choose which type of wireless security to use. Make sure you choose the one that is used by the router or wireless base station. This should be selected by default, but sometimes it will not be for some reason. If you don’t know which one it is, use trial and error to go through the different options.

Kiểm tra đã cắm cạc không dây chắc chắn

Some wireless cards aren’t supported very well. They show up as a wireless connection, but they can’t connect to a network because their drivers lack the ability to do this. See if you can get an alternative wireless driver, or if you need to perform some extra set-up (like installing a different firmware). See Chẩn đoán mạng không dây for more information.