Ručno podesite mrežna podešavanja

Ako vaša mreža samostalno ne dodeli mrežna podešavanja vašem računaru, moraćete sami ručno da unesete podešavanja. Ova tema pretpostavlja da već znate tačna podešavanja za korišćenje. Ako ne, moraćete da pitate administratora vaše mreže ili da pogledate u podešavanjima vašeg usmerivača ili mrežnog prebacivača.

Da ručno podesite mrežna podešavanja:

  1. Go to the desktop and start typing Settings.

  2. Click on Settings.

  3. If you plug in to the network with a cable, click Network. Otherwise click Wi-Fi.

    Uverite se da je vaša bežična kartica uključena ili da je mrežni kabal priključen.

  4. Click the settings button.

    For a Wi-Fi connection, the settings button will be located next to the active network.

  5. Select the IPv4 or IPv6 tab and change the Method to Manual.

  6. Ukucajte Adresu i Mrežni prolaz, kao i odgovarajuću Mrežnu masku.

  7. In the DNS section, switch the Automatic switch to off. Enter the IP address of a DNS server you want to use. Enter additional DNS server addresses using the + button.

  8. In the Routes section, switch the Automatic switch to off. Enter the Address, Netmask, Gateway and Metric for a route you want to use. Enter additional routes using the + button.

  9. Click Apply. If you are not connected to the network, open the system menu from the right side of the top bar and connect. Test the network settings by trying to visit a website or look at shared files on the network, for example.